+44 (0) 1462 475 600 peak.production@thepeakgroup.com
+44 (0) 1462 475 600 peak.production@thepeakgroup.com
COVID-19 STATEMENT: We are open for business and our objective is for everyone to remain safe with minimum disruption.
Our aim is for all promised delivery dates to be met however, in some circumstances it may be necessary to adjust some of these dates.
We remain committed in communicating fully with you to keep you updated at all times.
We can provide information and literature on solutions that may benefit any upcoming projects therefore please do not hesitate to contact us.
The Peak Machine Shop is effectively separated into two parts; the first part has a selection of CNC routers which are used exclusively for the machining of various plastics. We have the capability to machine a sheet size of 1200 x 600 x 12.7mm (1/2”), generally acetal, polycarbonates and glass filled plastics such as 4 Wep (tufnol). The second part has a well-equipped machine shop with a full range of both manual and CNC mills, with a capacity stretching up to a sheet size of 1500mm x 800mm generally no larger than 16mm thick, although we have the capacity to machine a lot thicker materials, should the need arise.
We have both XYZ and Tryax CNC mills, manual Bridgeport mills and a manual turning department, (mostly small diameter work) but stretching up to around 150mm diameter on occasion.
We also have a 3rd party Sheet Metal company on site which gives us access to their capabilities if the need arises.